Advertisement
Specifications
■ Ratings
Item
Rated supply voltage
External power supply
Operating voltage range
Power consumption
Dimensions
Mounting method
External connections
Degree of protection
Display
Digits
Input mode
Max. counting speeds
Counting range
Time specification
Timing accuracy
Memory backup
Input
Input signals
Input method
Count, reset,
start
Key protection No-voltage input (NPN transistor input)
Input re-
Reset
sponse
speed
Start
Key protection Approx. 1 s
Reset system
Note: 1. Contains 20% ripple (p-p) max.
2. Only a non-voltage input (NPN transistor) is possible for the key protection input. The key protection input will be a non-voltage input
even if the NPN/PNP input mode is set to PNP. Key protection is used to prohibit operating the Reset Key. The reset input terminals will
still be functional.
6-digit total counter
H7GP-C
100 to 240 VAC
12 to 24 VDC
(50/60 Hz)
(see note 1)
50 mA at 12 VDC
---
85% to 110% of rated supply voltage
100 to 240 VAC: 6.5 VA max.
12 to 24 VDC:
0.6 W max.
48 x 24 x 80 mm (W x H x D)
Flush mounting
Screw terminals
Panel surface: JEM IP66G and NEMA Type 4 (indoors)
7-segment, negative transmissive LCD (with red backlight)
6 digits (8.5-mm-high characters)
Up (increment)
30 Hz or 5 kHz (selected via DIP switch)
0 to 999999
---
---
EEP-ROM: 200,000 operations min.
Count, reset, and key protection (see note 2)
No-voltage input (NPN transistor input) or voltage input (PNP transistor input) (selected via DIP switch)
No-voltage input (NPN transistor input)
Short-circuit (ON) impedance:
Short-circuit (ON) residual voltage:2 VDC max.
Open (OFF) impedance:
Voltage input (PNP transistor input)
Short-circuit (ON) impedance:
ON voltage:
OFF voltage:
Open (OFF) impedance:
Short-circuit (ON) impedance:
Short-circuit (ON) residual voltage:0.5 VDC max.
Open (OFF) impedance:
20 or 1 ms (automatically switched according to
counting speed)
---
External and manual resets
H7GP-CD
H7GP-T
100 to 240 VAC
(50/60 Hz)
50 mA at 12 VDC
Accumulative
---
---
0.1 to 99999.9 h/1 s to 99 h 59 min 59 s
± 100 ppm (–10 ° C to 55 ° C)
Start, reset, and key protection (see note 2)
1 K Ω max.
100 k Ω min.
1 K Ω max.
9 to 24 VDC
5 VDC max.
100 k Ω min.
1 K Ω max.
100 k Ω min.
20 ms
20 ms
Approx. 1 s
Total Counter/Time Counter (DIN 48 x 24)
6-digit time counter
H7GP-TD
12 to 24 VDC
(see note 1)
---
H7GP
3
Advertisement
