Audix Performance AP41 User Manual page 7

QUICK SET UP GUIDE
6
6. Turn on receiver.
7. On receiver, press and hold the UP or DOWN button
Group/Channel. After 8-20 seconds a Group/Channel˝ will appear on the receiver.
8. Sync handheld transmitter to
receiver. Unscrew the battery cover and
locate the window housing infrared
device. From a close proximity (6 inches
/ 152.40 mm) point the infrared window
(located on the opposite side of the
batteries) towards the infrared sensor next
to the SYNC button and press the SYNC
button. Within a few seconds the
transmitter Group/Channel and
Frequency will match the receiver.
9. Sync bodypack transmitter to
receiver. Unscrew the battery cover
and locate the window housing infrared
device. From a close proximity (6 inches
/ 152.40 mm) point the window below
the LCD screen on the bodypack towards
the infrared sensor next to the SYNC
button and press the SYNC button. Within
a few seconds the transmitter Group/
Channel and Frequency will match
the receiver.
6
8
7
to trigger Scan for a clear