2. Lift up the base assembly by starting from the bottom edge of the base assembly.
Refer to
Figure
3. Release the tabs on the bottom edge of the base assembly.
4. Grasp the base assembly and remove the base assembly from the device
Figure 3-8. Base Assembly Removal
Base Assembly Installation
1. Align the base assembly onto the device
2. Install and secure twenty four (24) screws to the base assembly. Refer to
3. Install battery.
ID
Green
M2.0*3.0
Call
out
Red
M2.5*6.5
Call
out
Machine Maintenance Procedures
3-8.
Size
(Figure
3-8).
Quantity
6
18
(Figure
3-8).
(Figure
Figure
3-7.
Screw Type
3-8).
0
3-13