+
IMPORTANT:
Circuit boards >10 cm² have been highlighted with a yellow rectangle as
shown in
regulations for disposal.
Mainboard Installation
1. Put mainboard onto Base Assembly. Refer to
2. Install and secure two (2) screws (F) to mainboard. Refer to
3. Connect Powerboard cable (G) and Speaker cable (H) to mainboard. Refer to
Figure
3-18.
4. Connect LVDS cable (D) and DC-in cable (E) to mainboard connector
5. Put WLAN antenna (B) into the cable guides on the thermal module
6. Connect WLAN antenna (B) to WLAN card
7. Install HDD Module.
8. Install USB Module.
ID
Size
F
M2.5*4.0 Ni
3-22
Figure
3-19. Remove the Circuit board and follow local
Quantity
Figure 3-16
Figure
(Figure
3-17).
2
Machine Maintenance Procedures
3-17.
(Figure
3-17).
(Figure
3-17).
Screw Type
0