3. Starting from the top, remove the clear mylar tape (C) and disconnect the LVDS cable
from the LCD panel connector (D)
Figure 3-43. LVDS Cable
LVDS Cable Installation
1. Put LVDS cable into the LCD panel connector (D) and secure clear mylar tape (C)
Figure 3-43
(
).
2. Put yellow tape (B) on the LVDS cable to secure it. Refer to
3. Put LVDS cable (A) on the rear of the LCD panel. Refer to
4. Install LCD panel.
Machine Maintenance Procedures
(Figure
3-43)
.
C
D
Figure
3-42.
Figure
3-41.
0
3-45