Mainboard Installation - Acer Aspire One D270 Series Service Manual

CAUTION:
!
Figure 3-23. Mainboard
+
IMPORTANT:

Mainboard Installation

1. Place the mainboard (A) onto the lower case
2. Install and secure two (2) screws (E) to the mainboard
3. Connect the microphone cable (D) to the mainboard connector
4. Connect the speaker cable (C) to the mainboard connector
5. Connect the LVDS cable (B) to the mainboard connector
6. Install the Bluetooth module.
ID
E M2.0*3.0 NI
3-24
http://mycomp.su - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука. Схемы,сервис мануалы,инструкции по разборке ноутбука.
Make sure all cables are moved away from the device to avoid damage
during removal.
Circuit boards > 10 cm
shown in the above image. Remove the circuit board and follow local
regulations for disposal.
Size
2
have been highlighted with a yellow rectangle as
(Figure 3-21).
(Figure
Quantity
2
Machine Maintenance Procedures
3-21).
(Figure 3-21).
(Figure 3-21).
(Figure 3-21).
Screw Type
0