ZyXEL Communications PK5001Z Quick Start Manual page 4

vendor.
2 Internet Connection Setup: Automatic
Use this section to have your PK5001Z automatically detect and set up
your Internet connection.
1 Open your web browser to a website. Wait while your PK5001Z tries to
detect your DSL connection to your ISP. This may take a few minutes.
2 After it detects the connection, the DSL light shows green on your
device and the Internet light comes on when the Internet is ready for you
to use. If you have a PPPoE connection, you will have to enter your user
name and password.
3 Go to section
4 If you do not see the connection test screen, or the connection
test is not successful , follow the instructions i n the screen below, or
check your connections and restart the PK5001Z. If you still cannot
access the Internet, follow the steps in section 3.
3 Configuring your Wireless Settings
To create a wireless network, the PK5001Z and your wireless computer
must all use the sam e SSID (network name), channel and security
PK5001Z Quick Start Guide
3 if you wish to configure your wireless settings.
4