Installing The Expansion Card - Dell OptiPlex XE3 Small Form Factor Service Manual

Installing the expansion card

1.
NOTE: To remove the PCIe brackets, push the bracket upwards from the inside of your computer to release it and then
lift the bracket away from your computer.
Insert a screwdriver in the hole of a PCIe bracket and push hard to release the bracket , and then lift the bracket out from
your computer.
2. Insert the expansion card into the connector on the system board [1].
3. Press the expansion card until it clicks into place.
4. Close the expansion card latch and press it until it clicks into place [2].
10 Демонтаж і повторний монтаж