Diagnostics
The computer POST (Power On Self Test) ensures that it meets the basic computer requirements and the hardware is working
appropriately before the boot process begins. If the computer passes the POST, the computer continues to start in a normal
mode. However, if the computer fails the POST, the computer emits a series of LED codes during the start-up. The system LED
is integrated on the Power button.
The following table shows different light patterns and what they indicate.
Table 17. Diagnostics
Amber Blinking Pattern
2, 1
2, 2
2, 3
2, 4
2, 5
2, 6
2, 7
3, 1
3, 2
3, 3
3, 4
3, 5
3, 6
3, 7
Діагностичні повідомлення про помилку
Таблиця 18. Діагностичні повідомлення про помилку
Повідомлення про помилки
AUXILIARY DEVICE FAILURE
BAD COMMAND OR FILE NAME
CACHE DISABLED DUE TO FAILURE
CD DRIVE CONTROLLER FAILURE
DATA ERROR
Possible Problem
System board
System board, PSU, or cabling
System board, memory, CPU
CMOS (coin-cell) battery
BIOS
CPU
Memory
PCI/video
Storage/USB
Memory
System board
Memory
BIOS
BIOS
Опис
Можливо, сенсорна панель або зовнішня миша
несправні. Якщо у вас зовнішня миша, перевірте
кабельне з'єднання. Увімкніть параметр Pointing Device
(Указуючий пристрій) в програмі «Налаштування
системи».
Переконайтеся, що ви правильно написали команду,
поставили пробіли у відповідних місцях і використали
правильну назву шляху.
Збій роботи основної кеш-пам'яті, вбудованої в
мікропроцесор. Зв'яжіться з Dell
Оптичний дисковод не відповідає на команди
комп'ютера.
Жорсткому диску не вдається прочитати дані.
Problem Description
System board failure
System board, PSU, or cabling failure
System board, memory, or CPU failure
Coin-cell battery failure
Corrupt BIOS. Recovery image is not
found or is invalid during auto BIOS
recovery process.
CPU configuration error or CPU failure
Memory failure
PCI or video card / chip failure
Storage and USB configuration error or
failure
No memory detected
System board error
Memory configuration error,
incompatible memory, or invalid memory
configuration
Recovery image not found
Recovery image found but invalid
Пошук і виправлення несправностей
73
Need help?
Do you have a question about the OptiPlex XE3 Small Form Factor and is the answer not in the manual?
Questions and answers