General Options; System Information - Dell OptiPlex XE3 Small Form Factor Service Manual

Hide thumbs Also See for OptiPlex XE3 Small Form Factor:
Table of Contents

Advertisement

Available languages

Available languages

Параметри налаштування системи
ПРИМІТКА:
Залежно від моделі комп'ютера та встановлених пристроїв, деякі з перелічених параметрів можуть
бути відсутні.

General options

Table 1. General
Option

System Information

Boot Sequence
Advanced Boot Options
UEFI Boot Path Security
Date/Time
.
System information
Table 2. System Configuration
Option
Integrated NIC
Description
Displays the following information:
● System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag,
Ownership Date, Manufacture Date, and the Express Service Code.
● Memory Information: Displays Memory Installed, Memory Available, Memory Speed,
Memory Channel Mode, Memory Technology, DIMM 1 Size, DIMM 2 Size.
● PCI Information: Displays SLOT1, SLOT 2, SLOT1_M.2, SLOT2_M.2
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current
Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache,
Processor L3 Cache, HT Capable, and 64-Bit Technology.
● Device Information: Displays SATA-0, SATA 4, M.2 PCIe SSD-0, LOM MAC Address,
Video Controller, Audio Controller, Wi-Fi Device, and Bluetooth Device.
Allows you to specify the order in which the computer attempts to find an operating system
from the devices specified in this list.
● Windows Boot Manager
● ONboard NIC (IPV4)
● Onboard NIC (IPV6)
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By
default, this option is selected.
● Enable Legacy Option ROMs—Default
● Enable Attempt Legacy Boot
This option controls whether or not the system will prompt the user to enter the Admin
password when booting a UEFI boot path from the F12 Boot Menu.
● Always, Except Internal HDD—Default
● Always, Except Internal HDD and PXE
● Always
● Never
Allows you to set the date and time settings. Changes to the system date and time take
effect immediately.
Description
Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack'
is not selected by default. The options are:
● Disabled
● Enabled
● Enabled w/PXE (default)
NOTE:
Depending on the computer and its installed devices, the items listed in this
section may or may not appear.
Налаштування системи
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

D11sOptiplex xe3

Table of Contents