Table of Contents
Advertisement
PURIST - SERIF
FLORENCE - OXFORD
FLUELESS GAS FIRE
INSTALLATION AND USER INSTRUCTIONS
All instructions must be handed to user for safekeeping
Revision C - 08/11
Country(s) of destination - GB/IE
Focal Point Fires plc, Christchurch, Dorset BH23 2BT
Tel: 01202 499330
Fax: 01202 499326
www.focalpointfires.co.uk
e-mail: sales@focalpointfires.co.uk
Advertisement
Table of Contents
Related Manuals for FocalPoint Florence
Summarization of Contents
Installation Instructions
1.0 Important Notes
Key safety, regulatory, and operational guidelines for installation and use.
2.0 Appliance Data
Technical specifications for Purist, Serif, Florence, and Oxford models.
3.0 Installation Requirements
Requirements for installing the appliance, including flue, wall, and room considerations.
3.1 Room Sizing
Minimum room volume requirement for adequate air circulation and safe operation.
4.0 Site Requirements
Guidelines for selecting a suitable wall and location for the appliance.
Clearances to non-combustibles
Specifies minimum distances from non-combustible surfaces around the appliance.
Clearances to combustible materials
Specifies minimum distances from combustible materials around the appliance.
4.1 Ventilation
Requirements for room ventilation and openable windows for safe gas appliance operation.
5.0 Unpacking the Appliance
Instructions for safely removing the appliance from its packaging.
5.1 Component Checklist
List of components to check upon unpacking the appliance.
6.0 Gas Supply Routes
Details on routing the gas supply pipework to the appliance.
7.0 Fixing the Appliance
Instructions on how to securely mount the appliance to the wall.
7.1 Checking the Burner
Inspecting the burner for foreign matter before operation.
8.0 Testing and Commissioning
Procedures for testing and commissioning the installed gas appliance.
8.1 Operating the Appliance
Step-by-step guide on how to start, operate, and turn off the appliance.
8.2 Spark Failure
Information on the correct spark gap for reliable pilot ignition.
8.3 Setting Pressure
How to check and set the burner gas pressure for correct operation.
8.4 Fitting the Decorative Frame Assembly
Instructions for attaching the decorative facia or frame to the appliance.
9.0 Briefing the Customer
Guidance for the installer on briefing the customer about safe use and servicing.
10.0 Servicing
Overview of the recommended annual servicing procedure for the appliance.
10.1 Servicing the Burner Unit and Gas Assembly
Step-by-step guide for servicing the burner, gas valve, and pilot assembly.
10.2 Pilot Assembly
Specific instructions for cleaning and checking the pilot assembly.
10.3 Catalyst
Information on inspecting, cleaning, and replacing the catalytic converter.
10.4 Testing for Firebox Leakage
Procedure to ensure no combustion products escape the firebox.
11.0 Troubleshooting Guide
Common issues and their potential solutions for the gas fire.
User Instructions
1.0 Important Notes
Essential safety, regulatory, and warranty information for the user.
2.0 Clearances to Combustibles
Guidelines on maintaining safe distances from combustible materials.
3.0 Ventilation & Room Size
Requirements for room ventilation and size for safe appliance use.
4.0 Operating Instructions
Detailed steps for operating the gas fire, including ignition and control.
5.0 Combustion Monitoring System
Explanation of the ODS safety device and troubleshooting ODS shutdowns.
6.0 Cleaning
Instructions for cleaning different parts of the appliance.
7.0 Servicing
Guidance on the importance and frequency of annual servicing.
8.0 List of Spare Parts
A list of available spare parts for the appliance.
Need help?
Do you have a question about the Florence and is the answer not in the manual?
Questions and answers