Table of Contents
Advertisement
16.1.5
To remove cross flow fan and indoor fan motor
17. Remove the bearing by pulling it
out gently.
16. Remove the screw from the
evaporator.
Evaporator
Cross flow fan
Figure 7
Figure 8
18. Push the holdfast to the left and lift up the evaporator.
19. Remove the cross flow fan from the unit by
pulling it to the left and downward.
Figure 9
84
15. Remove the screw that holding
the cross flow fan and fan motor
axis.
20. Fan motor can be removed after the
removal of the cross flow fan.
Reminder: To reinstall the fan motor, adjust
the fan motor connector to 90° towards you
before fixing control board.
Advertisement
Table of Contents
