Table of Contents
Advertisement
14.3 Remote Control Button
14.3.1
SET Button
To check remote control transmission code and store the transmission code to EEPROM:
Press "Set" button by using pointer.
o
Press "Timer Set" button until a "beep" sound is heard as confirmation of transmission code changed.
o
To limit set temperature range for COOL & DRY, HEAT mode.
Press "Set" button by using pointer.
o
Press TEMP increment or decrement button to choose No. 3.
o
Press Timer increment or decrement button to select desired temperature low limit of set temperature for
o
COOL & DRY mode.
Press Timer Set button to confirm low limit selection.
o
Press TEMP increment or decrement button to choose No. 4.
o
Press Timer decrement or increment button to select desired temperature high limit of set temperature for
o
COOL & DRY mode.
Press Timer Set button to confirm high limit selection.
o
Press TEMP increment or decrement button to choose No. 5.
o
Press Timer increment or decrement button to select desired temperature low limit of set temperature for
o
HEAT mode.
Press Timer Set button to confirm low limit selection.
o
Press TEMP increment or decrement button to choose No. 6.
o
Press Timer decrement or increment button to select desired temperature high limit of set temperature for
o
HEAT mode.
Press Timer Set button to confirm high limit selection.
o
LCD returns to original display if remote control does not operate for 30 seconds or press Timer Cancel
o
button.
14.3.2
RESET (RC)
To clear and restore the remote control setting to factory default.
Press once to clear the memory.
o
14.3.3
RESET (AC)
To restore the unit's setting to factory default.
Press once to restore the unit's setting.
o
14.3.4
TIMER ▲
To change indoor unit indicator's LED intensity.
Press continuously for 5 seconds.
o
14.3.5
TIMER ▼
To change remote control display from Degree Celsius (°C) to Degree Fahrenheit (°F).
Press continuously for 10 seconds.
o
49
Advertisement
Table of Contents
