NAPCO GEMINI GEM-P1664 Programming Instructions Manual page 48

Page 48
(CON T'D) EXTER NAL RELA Y C ON TROL (ADDRE SS 1609 -1648)
ADDRESS 1609-1613 (RELAY EVENT 25)
1609 1610 1611 1612
RELAY # AREA Timeout Event ID COND.
L R L R L R L R
(•) (•)
ADDRESS 1624-1628 (RELAY EVENT 28)
1624 1625 1626 1627
RELAY # AREA Timeout Event ID COND.
L R L R L R L R
(•) (•)
ADDRESS 1639-1643 (RELAY EVENT 31)
1639 1640 1641 1642
RELAY # AREA Timeout Event ID COND.
L R L R L R L R
(•) (•)
To program, follow the 5 steps below:
To program, follow the 5 steps below:
STEP 1: RELAY # OPTIONS:
from Relay Module RM3008. Multiple events may be "mapped" to each relay,
up to a maximum of 16 events.
Select the relay number from Table 1 (shown on next page); enter in
corresponding right digit address location (left digit is not used).
STEP 2: AREA OPTIONS:
Each relay event can be assigned to Area 1, Area 2 or both Area 1 &
Area 2.
Select the area from Table 2 (shown on next page); enter in corresponding right digit address
location (left digit is not used).
STEP 3: TIMEOUTS:
Each relay event can be assigned a timeout depending on Alarm Type option.
If Alarm Type (see next page) is selected for timeout in minutes or seconds, select the timeout from Table
3 (shown on next page) in minutes or seconds and enter in corresponding address location (left digit and
right digits). To choose seconds or minutes, see step 5A below. 254 is maximum entry.
STEP 4: EVENT ID CODES:
Select 2-digit Event ID from Table 4 (see next page); enter in corresponding address locations (left and right digit).
STEP 5: RELAY EVENT CONDITION OPTIONS:
condition; also, select a timeout type for each.
5A. Select Alarm Type and Timeout Type from Table 5A (shown on next page); enter in corresponding address location (left
digit).
5B. Select Activation from from Table 5B (shown on next page); enter in corresponding address location (right digit).
X
GEM-P1664 Programming Instructions
ADDRESS 1614-1618 (RELAY EVENT 26)
1613
1614 1615
RELAY # AREA Timeout Event ID COND.
L R
L R L
(•) (•)
ADDRESS 1629-1633 (RELAY EVENT 29)
1628
1629 1630
RELAY # AREA Timeout Event ID COND.
L R
L R L
(•) (•)
ADDRESS 1644-1648 (RELAY EVENT 32)
1643
1644 1645
RELAY # AREA Timeout Event ID COND.
L R
L R L
(•) (•)
The GEM-P1664 supports 8 external relays
Each relay event can be assigned any of the available event IDs from the table.
Each relay event can be assigned an alarm type; and an activation
1616 1617 1618
R L R L R L R
1631 1632 1633
R L R L R L R
1646 1647 1648
R L R L R L R
RELAY # AREA Timeout Event ID
L
(•)
WI1423A 1/06
ADDRESS 1619-1623 (RELAY EVENT 27)
1619 1620 1621
RELAY # AREA Timeout Event ID COND.
L R L R L R L
(•) (•)
ADDRESS 1634-1638 (RELAY EVENT 30)
1634 1635 1636
RELAY # AREA Timeout Event ID COND.
L R L R L R L
(•) (•)
[Default = blank (•) blank (•) from
address 1609-1648]
RELAY EVENT OPTIONS
COND.
R L R L R L R L
(•)
Step Step Step Step Step
1 2 3 4
Continued
L
NAPCO Security Systems
1622 1623
R L R
1637 1638
R L R
R
5