Led Indicator Explained - Skyrc NC2200 Instruction Manual

Aa/aaa nimh/nicd battery charger & analyzer

Hide thumbs

Table Of Contents

Table of Contents

This process is also well-known as BATTERY FORMATTING and applicable to

the batteries that cannot be rescued by the REFRESH & ANALYZE mode.

The mode requires 39-45 hours to complete.

To start the BREAK-IN mode.

1, Insert the batteries into the slots.

2, Short-press the

"CHARGE" is blinking, click the

3, Short-press the

charge and discharge rate.

When "SET BATT CAPACITY" is displayed and click the

BREAK-IN.

Note: If you would like to apply the setting to all the rest slots, please press and hold the

button for two seconds instead of a short-press.

4, The LED indicator will be solid red during working.

5, The LED indicator will be solid green after the process is completed.