Desktop Holder
1
Purchase Desktop Holder separately.
Use specified AC Charger only.
Charging Time: Approximately 160 minutes
Charging Indicator
Desktop Holder
1
Connect AC Charger to Desktop Holder
Charger Terminal is located on the back of Desktop Holder.
Insert Charger Connector into Charging Port with the
printed top facing down.
2
Plug AC Charger into AC outlet
Extend Charger Plug blades. (Fold back when not in use.)
1-20
Charger Connector
AC100V
outlet
Release Tabs
Plug
AC
Charger
Charging
Port
3
Insert 705P into Desktop Holder
Place 705P in Desktop Holder and push until it clicks.
Charging Indicator illuminates and charging starts.
Charging is complete when Charging Indicator goes out.
4
When charging is complete, remove
705P from Desktop Holder and then
unplug AC Charger from AC outlet
Squeeze Release Tabs to remove Charger Connector.