Desktop Holder - SoftBank 706P Manual

Desktop Holder

1
Purchase Desktop Holder separately.
Use specified AC Charger only.
Charging Time: Approximately 160 minutes
Charging Indicator
Desktop Holder
1 Connect AC Charger to Desktop Holder
Charger Terminal is located on the back of Desktop Holder.
Insert Charger Connector into Charging Port with the
printed top facing down.
2 Plug AC Charger into AC outlet
Extend Charger Plug blades. (Fold back when not in use.)
1-20
Charger Connector
AC100V
outlet
Release Tabs
Plug
AC
Charger
Charging
Port
3 Insert 706P into Desktop Holder
Place 706P in Desktop Holder and push until it clicks.
Charging Indicator illuminates and charging starts.
Charging is complete when Charging Indicator goes out.
4 When charging is complete, remove
handset from Desktop Holder, then
unplug AC Charger
Squeeze Release Tabs to remove Charger Connector.