Lincoln Electric LF 52D Operator's Manual page 17

English
Green Mode – is a power management feature that enables
welding equipment to switch to low power state and reduce
power consumption while is not using.
Note: Not apply to Flextec
Display Configuration Settings:

Standby

Shutdown
Standby – this option allows you to reduce energy
consumption to the level below 50W when the welding
equipment is unused.

Default value: OFF.
To set the time for Standby option:

Press right control [23] to enter in to Standby menu

By the right control [23] set require time from 10-
300min range or Off this function.

Press right control [23] to confirm.

When machine is under Standby mode any action on
user interface or trigger activates normal work of
welding machine.
Shutdown – this option allows you to reduce energy
consumption to the level below 10W when the welding
equipment is unused.

Default value: OFF.
To set the time when Shutdown option will be turn on:

Press right control [23] to enter in to Shutdown menu

By the right control [23] set require time from 10-
300min range or Off this function.

Press right control [23] to confirm.

Operating system inform you 15s before activate
Shutdown Mode by time counter.
Note: When machine is under Shutdown mode it is
required to switch the machine off and on to activate
normal operation.
Note: Under Standby and Shutdown displays are disableb.
Advanced Menu – Device Configuration Menu.
Note: To access to advanced menu:

In Base Menu select the Advanced Menu (Adv).

Use the right button to confirm the selection.
15
® 350x i Flextec ® 500x.
English