Product Light Status - Epson L120 User Manual

Product Light Status

You can often diagnose problems with your product by checking its lights.
Lights
1 power
2 error
Light status
The power light is on
The power light is flashing
The power light is flashing
The error light is flashing
Condition/solution
The product is turned on.
The product is busy. Wait for the
turning off the product.
If you just filled the ink, the
minutes. Do not cancel this process.
Paper may be jammed in the product. Remove any jammed paper, and
press the cancel button to clear the error.
If the lights still flash, there may be a product error. Turn the product off,
check inside for jammed paper or foreign objects, then turn the product
back on. If the error continues, contact Epson for support.
77
power light to stop flashing before
power light will flash for approximately 20