Solving Setup Problems; Noise After Filling The Ink - Epson L120 User Manual

• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic:
Related concepts
When to Uninstall Your Product Software
Print Head Cleaning
Print Head Alignment
Related references
Where to Get Help
Related tasks
Loading Paper

Solving Setup Problems

Check these sections if you have problems while setting up your product.

Noise After Filling the Ink

Software Installation Problems
Product Lights Turn On and then Turn Off
Parent topic:
Noise After Filling the Ink
If you hear noises from your product after filling the ink tanks with ink, check these explanations:
• The first time you fill the tanks with ink, the product must charge its print head. Wait until charging
finishes before you turn off the product, or it may charge improperly and use excess ink the next time
you turn it on. Your product is finished charging the print head when the
• If the product's print head stops moving or making noise, and the charging process has not finished
after approximately 20 minutes, turn off your product. Turn it back on and check to see if charging is
still in progress. If it is still in progress, contact Epson for help.
Parent topic:
Related references
Where to Get Help
Related topics
Refilling Ink
Solving Problems
Solving Problems
Solving Setup Problems
79
power light stops flashing.