Xenosys L2S14C User Manual page 5

WARNING for Main Body:
1. Never disassemble or undertake modification of the equipment.
2. Do not put any metal or flammable object into the main body. It may cause fire or electric
shock.
3. Any drop or hard shock may cause the potential damage to the equipment.
4. Do not use or store the equipment in the area where get the direct ray of light, humidity, dust
or soot.
5. Clean up with a dry and soft cloth.
6. Do not use the detergent or chemical fluid to clean which may cause discoloration.
7. Avoid the reach of children or pets.
8. Maintain the following conditions for storing the product.
Ambient Temperature
Relative Humidity
Pressure
WARNING for LED Lens Module:
1. Do not drop, crush, or put a high pressure on LED lens module.
2. Clean LED lens surface with dipped alcohol or methanol in dry cloth softly.
3. Do not bend or twist the connection cable between the main body and LED lens module
which may cause the defective.
4. LED optic outside emits heat, so be careful on touching.
5. Do not look directly into LED lens module or some one's eyes to avoid the risk of permanent
eye damage.
Portable LED Headlight System (L2S14C)
Environment for Storage & Transportation
5
6℃ ~ 40℃(43℉ ~ 104℉)
30% ~ 85% @ 6℃ ~ 40℃(43℉ ~ 104℉)
860 hPa ~ 1060 hPa
www.xenosys.co.kr