Xenosys L2S14C User Manual page 15

E. How to exchange battery
1. Prepare fully charged battery.
2. Remove the battery: To remove the used battery, grab it with hand and push to the
direction of '-' terminal. Lift up the battery of '+' terminal at the same time to pull out.
Step 2: Lift up
& pull out
3. Install new battery: To install the fully charged battery, grab it with hand and push to the
direction of '-' terminal. Push to the battery of '+' terminal to the bottom of the cradle.
②
Step 2: Push to the
bottom of the cradle
4. Check the battery installation: Turn the battery to check the exchange. (Finish exchanging)
Portable LED Headlight System (L2S14C)
②
15
①
Step 1: Push to the direction
of terminal '-' and Step 2
①
Step 1: Push to the direction
of terminal '-' and Step 2
www.xenosys.co.kr