Electrolux CVE611 User Manual page 32

cleaning your oven door
(pyrolytic models)
Cleaning the door glass panels
caution WARNING
Do not to use harsh abrasives on the glass panes as the
reflective surface plays a role in the function of the oven.
Do not place glass in dishwasher. Hand wash only with
a soft cloth and warm soapy water. When dry polish with
a soft cloth and ensure the glass is dry before reassembly.
Re-assembling the 4 layer oven door
Re-assembling the door glass panels
• Assemble the rubber spacers to the upper corners of one
of the clear glass panels. Position the panel into the lower
position of the door, ensuring the chamfered corner of the
panel is placed in the correct location as shown in the
next diagram.
Chamfer to be located in this corner
• Insert the remaining smaller clear glass panel into the
middle position, ensuring the chamfered corner of the
panel is placed in the correct location as shown in
the diagram below.
Chamfer to be located in this corner
32 CLEANING YOUR OVEN DOOR (PYROLYTIC MODELS) Built-in Cooking
• Insert the black bordered glass panel into the upper
Replacing the top door trim
• Hold the top door trim at each side and position it to the
• Push the trim down with its top edge over the glass panel
Rubber spacers
• Push the middle of the trim down to ensure it is straight
position, ensuring the painted surface is facing the
downside as per the diagram below..
inside edge of the glass.
until the clip snap in on each side of the trim.
and firm against the glass panel.
stirr
pos
st
p
door
column
door
column