Adjust The Tilt Foot - NEC UM383WL User Manual

Adjusting the tilt (Tilt foot)
Adjusting the left and right tilt.
1. Rotate the tilt foot to adjust the left and right tilt.
The tilt foot is equipped at the left and the right front bottom of the
projector.
If the projected image is tilted, rotate one of the tilt foot to adjust
the angle to project.
If keystone distortion is appeared, adjust it either by the  button
on the cabinet or keystone button on the remote control
NOTE:
• Do not extend the tilt foot beyond its height limit (18 mm/0.7 inches). Doing
so may cause the tilt foot to come out of the projector.
• Do not use the tilt-foot for purposes other than originally intended.
Misuses such as using the tilt foot to carry or hang (from the wall or ceiling)
the projector can cause damage to the projector.
2. Projecting an Image (Basic Operation)
Up
Down
21