NEC UM383WL User Manual page 51

WIRED LAN
ENABLE
DISABLE
SETTING
DHCP ON
DHCP OFF
IP ADDRESS
SUBNET MASK
GATEWAY
AUTO DNS ON
AUTO DNS OFF
APPLY
• NAME
PROJECTOR NAME
HOST NAME
• ALERT MAIL
ALERT MAIL (English
only)
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS
1,2,3
TEST MAIL
SAVE
Turn on wired LAN connection
Turn off wired LAN connection
Set for wired LAN.
Automatically IP ADDRESS, SUBNET MASK, and GATEWAY are assigned to the
projector by your DHCP server.
Set IP ADDRESS, SUBNET MASK, and GATEWAY to the projector assigned by your
network administrator.
Set your IP ADDRESS of the network connected to the projector.
Set your SUBNET MASK number of the network connected to the projector.
Set the default GATEWAY of the network connected to the projector.
DHCP server will automatically assign IP ADDRESS of DNS server connected to the
projector.
Set your IP ADDRESS of DNS server connected to the projector.
Make the settings for wired LAN effective.
Enter a name for your projector so that your computer can identify the projector. A
projector name must be 16 characters or less.
TIP: Projector name will not be affected even when [RESET] is done from the menu.
Enter the hostname of the network connected to the projector. A host name must be
16 or less.
This option will notify your computer of light replace time or error messages via e-mail
when using wired LAN.
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
The light and filter are at the end of its usable life. Please replace the light and
filters.
Projector Name: NEC Projector
Light Hours Used: 100 [H]
Enter sender's address.
Enter the SMTP server name to be connected to the projector.
Enter your recipient's address. Up to three addresses can be entered.
Send a test mail to check whether your settings are correct or not
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if network settings
are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen,
check if the Recipient's Address is correct.
Click this button to save the above settings on the projector.
41
3. Convenient Features