Replacement Bulbs - Pontiac 2006 GTO Owner's Manual

4. Turn the appropriate bulb socket counterclockwise
while holding the assembly, to release it from the
housing.
5. Remove the bulb from the bulb socket by pushing it
in and turning it counterclockwise.
6. Install the new bulb into the bulb socket by pushing
it into the socket and turning it clockwise.
7. Install the bulb socket into the taillamp housing,
ensuring that the socket locks securely into place.
8. Reinstall the lamp assembly so that the clips are
seated correctly. Fit the housing to the body, so
that the locating pegs snap into the clips.
9. Reinstall and tighten the screws to secure.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
Front Turn Signal/Parking Lamp
Headlamps
High-Beam
Low-Beam
Rear Turn Signal Lamp
Stoplamp/Taillamp
For replacement bulbs not listed here, contact your
dealer.
Bulb Number
1156
1157NA
H9
H11LL
1156NA
1157
5-49