Removing The Flat Tire And Installing The Spare Tire - Pontiac 2006 GTO Owner's Manual

Removing the Flat Tire and
Installing the Spare Tire
To remove the wheel nut caps, do the following:
1. Remove each wheel nut cap with the wheel nut cap
tool provided. Insert the nut cap tool into the nut
cavity, squeeze the tool to grasp the nut cap,
and pull out to remove it.
If the nut caps are hard to remove, use the tip of
the wheel wrench to remove the nut caps.
2. Use the wheel wrench to loosen all the wheel nuts.
Do not remove them yet.
3. Fit the jack handle onto the jack by sliding the open
end of the handle over the nut end of the jack.
4. Position the jack and
raise the jack head
until it fits firmly into the
notches (A and B), in
the vehicle's frame
closest to the tire
being changed.
5-71