Lenovo ThinkStation P520 User Manual page 97

4. Press both clips simultaneously toward each other and pull the conversion bracket out of the rear of the
kit.
Figure 45. Removing the conversion bracket from the kit
5. To remove the 2.5-inch storage drive, flex both sides of the conversion bracket and then remove the
drive out of the bracket. Do not touch the circuit board on the drive.
Figure 46. Removing the 2.5-inch storage drive from the bracket
6. To install a 2.5-inch storage drive, ensure that the conversion bracket is folded. To fold the bracket, do
the following:
a. Remove pins 1 and install them into slots
Figure 47. Removing pins and installing them into the new slots
2 .
Chapter 7
.
Hardware removal and installation
83