Lenovo ThinkStation P520 User Manual page 114

5. To remove the M.2 solid-state drive, do the following:
a. Loosen the screw that secures the M.2 solid-state drive
b. Remove the M.2 solid-state drive with the screw holder from the M.2 solid-state drive slot
c. Remove the screw holder from the M.2 solid-state drive
Figure 78. Removing the M.2 solid-state drive
6. To install an M.2 solid-state drive, do the following:
a. If necessary, remove the film that protects the thermal pad. Align the notch
with the corresponding notch
solid-state drive as shown.
Figure 79. Inserting the screw holder onto the M.2 solid-state drive
100
P520 User Guide
2 in the M.2 solid-state drive. Insert the screw holder onto the new M.2
1 .
3 .
1 in the screw holder
2 .