Table of Contents
Advertisement
BHT-1700 Series
Charging procedure
Charge your BHT using the Communication Unit as described below.
Insert your BHT onto the Communication Unit. Press BHT down till you hear a ' click ' to make sure it is
secured in the charging station.
Insert a spare battery in the slot for charging the spare battery located at the back of the CU as shown
in a figure below.
The status of BHT charging is shown on the status indicator of the BHT, while the status of spare
battery charging is shown in the status indicator of the Cradle.
The battery charging status is shown as below:
Status
Red, solid
Red, blink
Green, solid
No light
Not charging could be the result of battery damage, battery ' s failure to touch the connector, or AC plug
coming off.
Charging error could be due to high battery temperature.
Description
While charging BHT
Charging error (Charging will stop.)
Charging complete
The charging cable is not correctly connected.
22
Advertisement
Table of Contents
