Tire Inspection And Rotation - Pontiac 2003 Bonneville Owner's Manual

To reset (calibrate) the system with a Driver Information
Center (DIC):
1.
2.
3.
4.
5.
Turn the ignition switch to ON.
Using the MODE and SELECT buttons, change the
The system Completes the calibration process during
DIC to display TIRE PRESSURE.
driving. Calibration time can take 45 to 90 minutes, . . ,
Press and hold the RESET button for about five
seconds.
The display should change to read TIRE
PRESSURE RESET. If TIRE PRESSURE RESET
does not appear on the display after about five
seconds, see your dealer for service.
When you release the button after seeing the TIRE
PRESSURE RESET message, the display will
change to read TIRE PRESSURE NORMAL.
1.
2.
4. Release the TIRE PRESS RESET button and the
system should reset. The TIRE PRESS light will
go out.
To reset (calibrate) the system with a systems monitor:
n
3 .
Turn the ignition switch to ON.
Press and hold the TIRE PRESS RESET button for
about five seconds.
should begin to flash. If the TIRE PRESS light
does not begin to flash after about five seconds, see
your dealer for service.
T I L - T I ~ T
nnr-nn
I:-.LL
--
L L -
-..-.I.---
I I le I 1 n c
r ncaa
I I ~ I 1 1 VI I
11 I C
a y a t c l
I 13 I I IUI IILUI
depending on your driving habits. After the system has
been calibrated, the system will alert the driver that
a tire is low, up to a maximum speed of 65 mph
(1
05 km/h).
Tire Inspection and Rotation
Tires should be rotated every 6,000 to 8,000 miles
(10 000 to 13 000 km).
Any time you notice unusual wear rotate your tires as
soon as possible and check wheel alignment. Also
check for damaged tires or wheels. See When It
Is
Time
for New Tires on page 5-67 and Wheel Replacement
on page 5-69 for more information.
Tne purpose oi reguiar rorarion is io acnieve more
uniform wear for all tires on the vehicle. The first rotation
is the most important. See "Part A: Scheduled
Maintenance Services," in Section 6, for scheduled
rotation intervals.
5-65