Radiator Pressure Cap - Pontiac 2000 Firebird Owner's Manual

Adding Coolant to the Recovery Tank
If you need more coolant, add the proper DEX
coolant mixture at the coolant recovery tank, but only
when your engine is cool. If the tank is very low or
empty, also add coolant to the radiator. See "Engine
Overheating" in the Index for information.
CAUTION:
Turning the radiator pressure cap when the
engine and radiator are hot can allow steam and
scalding liquids to blow out and burn you badly.
Never turn the pressure cap
when the engine and radiator are hot.
Add coolant mixture at the recovery tank, but be careful
not to spill it.
R
-
COOL
-- --
even a little
CAUTION:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol,
and it will burn if the engine parts are hot
enough. Don't spill coolant on a hot engine.
Occasionally check the coolant level in the radiator.
For information on how to add coolant to the radiator,
see "Cooling System" in the Index.

Radiator Pressure Cap

NOTICE:
Your radiator cap is an 18 psi (124 kPa)
-
pressure type cap and must be tightly installed to
prevent coolant loss and possible engine damage
from overheating. Be sure the arrows on the cap
line up with the overflow tube on the radiator
filler neck.
6-29