Table of Contents
Advertisement
f When editing a clip with a large number of links using nonlinear editing software, etc., the software may not operate properly depending on the type of
software.
f Refer to the support desk at the following website for the latest information on software whose operability has been confirmed.
http://pro-av.panasonic.net/
Simultaneous recording
This function records the same image onto two microP2 memory cards when the two microP2 memory cards are inserted into two slots.
Start recording
Slot 1
A clip
A clip
Slot 2
Selecting [ON] in the main menu → [RECORDING SETUP] → [SIMUL REC] will set the camera to simultaneous recording mode.
The remaining time that can be simultaneously recorded (the remaining time of the memory card that has less available recording space) is displayed in
the media remaining space indicator on the screen, and [SIMUL] is displayed.
When the microP2 memory card in the slot with less remaining recording space becomes full, simultaneous recording will stop.
When starting simultaneous recording again, replace the microP2 memory card in a slot with full capacity with a new microP2 memory card, and press
the REC button. When the simultaneous recording cannot be performed, [SIMUL] indication is displayed with a diagonal line.
If you press the REC button without replacing the microP2 memory card, normal recording will be performed on the microP2 memory card in slot 2 (the
slot with remaining memory space).
For details on system modes in which simultaneous recording can be used, refer to the table in "System modes and recording functions" (page 79).
@
NOTE
t Start recording when two microP2 memory cards are recognized. When recording is started before both microP2 memory cards are recognized,
normal recording is performed using either microP2 memory card. The card status is checked after recording ends. At that time, if both cards are
recognized, simultaneous recording is performed.
t When the main menu → [SYSTEM MODE] → [LINE&FREQ] is set to [1080-59.94P], [1080-50P], or [1080-23.98PsF], and [REC FORMAT] is set to
[AVC-I200], simultaneous recording is not performed.
t Simultaneous recording cannot be used simultaneously with loop recording, interval recording, or one-shot recording.
t If recording stops because a recording malfunction occurs in one of the microP2 memory cards during simultaneous recording, the camera will
continue recording onto the other microP2 memory card. However, if the card is removed while accessing, recording will stop.
t If there is space in one of the microP2 memory cards after simultaneous recording has ended, the microP2 memory card with space will automatically
be the recording target.
Press the REC button again to record normally.
t If only one microP2 memory card is inserted when simultaneous recording mode is set, the camera will record normally.
t The final clip delete function after simultaneous recording is disabled.
Background recording
If microP2 memory cards are inserted in two slots, set the background recording mode and then press the recording button to start recording
simultaneously on slot 1 and 2. On slot 1, recording can be repeatedly started and stopped as necessary by operating the recording button. On slot 2,
the recording operation continues as background recording.
By performing background recording on slot 2, you will not miss important scenes while recording is stopped.
For details on system modes in which background recording can be used, refer to the table in "System modes and recording functions" (page 79).
Chapter 4 Shooting — Special recording functions
Memory card recording time
End recording
Start recording
Stand-by
B clip
Stand-by
B clip
– 73 –
End recording (no remaining space)
C clip
Advertisement
Table of Contents
