Table of Contents
Advertisement
Item
[LCD COLOR LEVEL]
[LCD BACKLIGHT]
[SELF SHOOT]
[CARD FUNCTIONS]
Configure the settings regarding reading/writing of the scene files and user files to SD memory cards.
Item
[SCENE FILE]
[USER FILE]
[SD CARD PROPERTY]
[FORMAT SD CARD]
[OTHER FUNCTIONS]
Configure these items to make settings for reading/writing, initialization of user file data on the internal memory, and the camera settings.
Item
[USER FILE]
[ACCESS LED]
[TALLY LAMP]
[CLOCK SETTING]
[TIME ZONE]
[SEEK POS SEL]
[GPS]
[P.OFF GPS DATA]
[MENU INITIALIZE]
[MAINTENANCE]
These are items for performing maintenance inspection of the camera. This menu is used for updating the firmware version of the camera.
Item
[UPDATE]
[ACTIVATE]
Chapter 6 Menu Operations — Menu list
Adjusts the color level of the LCD monitor.
[−15]...[15]
f Factory setting: [0]
Adjusts the brightness of the LCD monitor backlight.
[1]...[−3]
[1]: Brightens more than normal.
[−3]: Becomes the darkest.
f Factory setting: [0]
Sets the display of the LCD monitor when mirror shooting is performed.
[NORMAL]: Does not invert the left and right sides.
[MIRROR]: Inverts the left and right sides.
f Factory setting: [MIRROR]
Loads scene files from an SD memory card or saves them to an SD memory card.
[LOAD]: Loads scene files.
[SAVE]: Saves scene files.
Loads user files from an SD memory card or saves them to an SD memory card.
[LOAD]: Loads user files.
[SAVE]: Saves user files.
Displays the SD memory card status. The format condition, available space, etc. can be checked.
Formats an SD memory card.
Loads/saves/initializes user files on the camera memory.
[LOAD]: Loads user files.
[SAVE]: Saves user files.
[INITIALIZE]: Restores user files to the factory settings.
Selects if the microP2 memory card access LED is illuminated or not.
[ON], [OFF]
f Factory setting: [ON]
Sets up the tally lamp lighting conditions.
[FRONT]: The front tally lamp lights up.
[REAR]: The rear tally lamp lights up.
[BOTH]: Both the front and rear tally lamps light up.
[OFF]: The tally lamp does not light up.
f Factory setting: [OFF]
Sets the built-in calendar (date and time) and time zone.
For GMT, set using 30 minute intervals from −12:00 to +13:00 (however, +12:45 is possible). After setting
the time, when changing the setting value for [TIME ZONE], the displayed and registered times switch to
the time with the time difference.
Selects the position to move when the <)>/<%> button is pressed while playback is paused.
[CLIP]: Top of the clip
[CLIP&TEXT MEMO]: Top of the clip and text memo location
f Factory setting: [CLIP]
Configures internal GPS settings.
[ON]: Activates the GPS operation. Outputs the location information as a signal to the <SDI OUT> terminal
and records it as clip metadata.
[OFF]: Does not activate the GPS operation. Does not output and record the location information.
f Factory setting: [OFF]
Retains the GPS location information when the camera is turned off. Sets whether to record the retained
data at the next turning on until a positioning is performed.
[HOLD]: Retains and records data.
[CLEAR]: Clears the data at the time when the camera is turned off. Records 0 (No-Info) at the next
turning on until a positioning is performed.
f Factory setting: [CLEAR]
Restores the whole setting menu including all scene files (1 to 6) and user files to the factory settings.
Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD
memory card.)
This menu activates optional functions (separate fees required).
– 138 –
Description of settings
Description of settings
Description of settings
Description of settings
Advertisement
Table of Contents
