Table of Contents
Advertisement
Item
[SAFETY AREA]
[FRAME MARK]
[FRAME SIG]
[FRAME LVL]
[LEVEL GAUGE]
[FOCUS BAR]
[ZOOM/FOCUS]
[LEVEL METER]
[DATE/TIME]
[REC COUNTER]
[P2CARD REMAIN]
[BATTERY]
[OTHER DISPLAY]
[DISPLAY SETTING]
[IRIS]
[GAIN]
[SHUTTER]
[WHITE BALANCE]
[ND]
[Y GET]
[D.ZOOM]
[SCENE FILE]
Chapter 6 Menu Operations — Menu list
Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]...[100%]
f Factory setting: [90%]
Enables/disables frame marker.
[ON], [OFF]
f Factory setting: [OFF]
Sets frame marker aspect ratio.
[4:3], [13:9], [14:9], [1.85:1], [2.35:1]
f Factory setting: [4:3]
Sets the level of the outside of the frame marker.
[0]...[15]
f Factory setting: [15]
Enables/disables level gauge.
[ON], [OFF]
f Factory setting: [OFF]
Displays/hides the focus bar indicating the degree of focus.
[ON], [OFF]
f Factory setting: [OFF]
Selects the unit of zoom and focus values.
[NUMBER]: Displays position values of zoom and focus from [0] to [99].
[mm/feet]: Zoom is displayed in units of millimeters, and focus in units of feet.
[mm/m]: Zoom is displayed in units of millimeters, and focus in units of meters.
[OFF]: Neither zoom nor focus is displayed.
f Factory setting: [NUMBER]
Displays/hides audio level meter.
[ON], [OFF]
f Factory setting: [ON]
Sets date and time display.
[TIME]: Displays the hour, minute, and second.
[DATE]: Displays the year, month, and date.
[TIME&DATE]: Displays the hour, minute, and second, as well as year, month, and date.
[OFF]: Does not display.
f Factory setting: [OFF]
Sets operation of the counter for recording.
[TOTAL]: Performs continuous counting until it is reset using the <RESET> button.
[CLIP]: Clears the counter value at the start of recording and counts the time for each recording.
f Factory setting: [TOTAL]
Selects the [ON]/[OFF] of the microP2 memory card remaining recording capacity display.
[ON], [OFF]
f Factory setting: [ON]
Turns the battery charge level indicator [ON]/[OFF].
[ON], [OFF]
f Factory setting: [ON]
Sets display details of other information.
[PARTIAL]: Displays information partly.
[ALL]: Displays all information.
[USER]: Displays the information set in [DISPLAY SETTING].
f Factory setting: [PARTIAL]
Displays/hides F value and auto iris control status.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides gain value.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides shutter speed.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides the <WHITE BAL> switch position.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides the set value of ND filter.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides brightness of Y GET.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides digital zoom display.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides scene file name.
[ON], [OFF]
f Factory setting: [ON]
– 136 –
Description of settings
Advertisement
Table of Contents
