Table of Contents
Advertisement
Item
[DRS]
[FBC]
[AREA]
[OIS]
[FULL AUTO]
[SHOOTING MODE]
[PB MODE]
[SYSTEM MODE]
[REC FORMAT]
[FRAME RATE]
[ASPECT]
[ONE CLIP REC]
[REC MODE]
[GPS]
[EVF DETAIL]
[EVF PEAK LEVEL]
[EVF PEAK FREQ]
[EVF SETTING]
[EVF BRIGHTNESS]
[EVF CONTRAST]
[EVF COLOR LEVEL]
[EVF COLOR]
[EYE SENSOR]
[LCD SETTING]
[LCD BRIGHTNESS]
[LCD CONTRAST]
Chapter 6 Menu Operations — Menu list
Toggles whether to display when the dynamic range stretcher function is activated.
[ON], [OFF]
f Factory setting: [ON]
Toggles whether to display when the flash band compensation function is activated.
[ON], [OFF]
f Factory setting: [ON]
Toggles whether to display when the area mode function is activated.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides image stabilizer display.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides the display when the <AUTO/MANUAL> switch is at <AUTO>.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides high-sensitivity mode.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides the operation status of playback.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides system mode.
[ON], [OFF]
f Factory setting: [OFF]
Displays/hides recording format display.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides frame rate.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides letterbox recording display.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides the status of one-clip recording mode.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides simultaneous recording mode display.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides GPS signal reception status.
[ON], [OFF]
f Factory setting: [ON]
Adjusts the contour of the video in the viewfinder or LCD monitor to make it easier to focus.
[ON], [OFF]
f Factory setting: [ON]
If the function is assigned to the USER button, [ON]/[OFF] can be switched using the USER button.
Adjusts the peaking level of the viewfinder and LCD monitor.
[−7]...[7]
f Factory setting: [0]
Adjusts the peaking frequency of the viewfinder and LCD monitor.
[HIGH], [LOW]
f Factory setting: [LOW]
Adjusts the brightness of the viewfinder.
[−15]...[15]
f Factory setting: [0]
Adjusts the contrast of the viewfinder.
[−30]...[30]
f Factory setting: [0]
Adjusts the color level of the viewfinder.
[−15]...[15]
f Factory setting: [0]
Selects whether to display video in the viewfinder in color or in black and white.
[ON]: Displays in color.
[OFF]: Displays in black and white.
f Factory setting: [ON]
Selects sensitivity of eye sensor.
[HIGH], [LOW]
f Factory setting: [HIGH]
Adjusts the brightness of the LCD monitor.
[−15]...[15]
f Factory setting: [0]
Adjusts the contrast of the LCD monitor.
[−30]...[30]
f Factory setting: [0]
– 137 –
Description of settings
Advertisement
Table of Contents
