Pontiac 1997 Bonneville Owner's Manual page 159

NEXT (2): Press this button or the SEEK up arrow to
search for the next selection on the tape. If you hold the
button, the player will continue moving forward through
the tape. Yuur tape must have at least three seconds of
silence between each selection for NEXT or SEEK to
work. The tape direction m o w blinks during NEXT or
SEEK operation. Press NEXT
or
the SEEK up arrow to
stop searching. The sound will mute during NEXT or
SEEK operation.
PROG (3): Press this button to play the other side of
the tape.
(4): Press this button to reduce background noise.
Note that the double-D symbol will appear on the display.
Dolby00 Noise Reduction is manufactured under a
license from Dolby Laboratories Licensing Corporation,
Dolby and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
REV (5): Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last-selected station while the tape reverses.
You may select stations during REV operation by using
SEEK or TUNE.
FWD (6): Press this button to advance quickly to
another part of the tape. Press the button again to return
to playing speed. The radio will play the l'ast-selected
station while the tape advances. You may select stations
during FWD operation by using SEEK or TUNE.
AM-'FM:
Press this button to play the radio when a tape
is in the player.
TAPE/PLAY: Press this button to change to the tape
function when the radio is on. The tape symbol with an
arrow will appear on the display when the tape is active.
To return to playing the radio, press the AM-FM button.
EJECT:
Press this button to remove
the
tape. The
radio will play. EJECT may be activated with either the
ignition or radio off, Cassettes may be loaded with the
radio
off if
this button
is
pressed first. If you leave
a
cassette tape in the player while listening to the radio, it
may become warm.
CLN:
If this message appears on the display, the
cassette tape player needs to be cleaned. It will still play
tapes, but you should clean it as soon as possible to
prevent damage
to the
tapes and player. See "Care of
Your Cassette Tape Player" in the Index. After you clean
the player, press and hold EJECT for five seconds to
reset the CLN indicator. The radio
will
display ---
to
show the indicator was reset.
3-18