Table of Contents
Advertisement
INSERT FLEX LINE THROUGH POST
Insert the stainless steel Flex Tube
Assembly into the Post. The inlet side of
the Gas Tubing may protrude from the
bottom of the Patio Base or through the
large square hole in the back of the
square Post.
Do not attempt to cut or alter the flex
tube in any way.
Anchor the Base to your patio using
(2) Holes in the Base.
(Hardware not Included)
Note: Make sure that large upper
rectangle cut out is facing in the direction
that you want your grill to face.
B102524-0-0219
Page 13
Advertisement
Table of Contents
