Lexmark MS517 User Manual page 60

Using MS510dn, MS517dn, MS610dn, and MS617dn
Use To
Off Use the factory default settings for all settings associated with Eco‑Mode. This setting supports
the performance specifications for your printer.
Energy Reduce energy use, especially when the printer is idle.
•
•
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper •
•
2
Press .
Reducing printer noise
Use Quiet mode to reduce the printer noise.
1
From the printer control panel, navigate to:
> Settings > Settings >
2
Select a setting you want.
Use
On
Off
3
Press .
Adjusting Sleep mode
1
From the control panel, navigate to:
> Settings >
2
In the Sleep Mode field, select the number of minutes the printer is idle before it enters Sleep mode.
3
Apply the changes.
Printer engine motors do not start until a job is ready to print. You may notice a short delay
before the first page is printed.
The printer enters Sleep mode after one minute of inactivity.
Enable the automatic two‑sided (duplex) feature.
Turn off print log features.
> General Settings >
> Settings >
> Quiet Mode >
To
Reduce printer noise.
Notes:
•
Print jobs will process at a reduced speed.
•
Printer engine motors do not start until a
document is ready to print. There is a short delay
before the first page is printed.
Use factory default settings.
Note: This setting supports the performance
specifications of the printer.
> General Settings > > Timeouts > > Sleep Mode >
60