Lexmark MS517 User Manual page 46

Using MS510dn, MS517dn, MS610dn, and MS617dn
3
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.
•
Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them.
•
Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on
a level surface.
4
Load the paper or specialty media.
Notes:
•
Do not force paper or specialty media into the multipurpose feeder.
•
Make sure the paper or specialty media is below the maximum paper fill indicator located on the
paper guides. Overfilling may cause paper jams.
46