Pontiac 1993 Grand Am Owner's Manual page 72

To Set Cruise Control
1. Move the cruise control switch to
ON.
If you leave your cruise
W control switch ON when
you're not using cruise, you might
hit a button and go into cruise
when you don't want to. You could
be startled and even lose control.
Keep the cruise control switch
OFF
until you want to use it.
I
3.
Push in the SET button at the end of
4. Take your foot off the accelerator
the lever and release it.
pedal.
To Resume a Set Speed
Suppose you set your cruise control at a
desired speed and then you apply the
brake or clutch pedal. This, of course,
shuts off the cruise control. But you
don't need to reset it. Once you're going
about 25 mph (40 k d h ) or more, you
can move the cruise control switch from
ON to R/A (which stands for Resume/
Accelerate) for about half a second.
You'll go right back up to your chosen
speed and stay there.
2. Get up to the speed you want,
71
...