Pontiac 1993 Grand Am Owner's Manual page 35

Securing a Child Restraint in fhe
Center Seaf Posifion
(CONI)
6. To tighten the belt, pull its free end
while you push down on the child
restraint.
7. Push and pull the child restraint in
different directions to be sure it is
secure. If the child restraint isn't
secure, turn the latch plate over and
buckle it again. Then see if it is
secure. If it isn't, secure the restraint
in a different place in the vehicle and
contact the child restraint maker for
their advice.
To remove the child restraint, just
unbuckle the vehicle's safety belt. It will
be ready to work for an adult or larger
child passenger.
34
Securing a Child Resfrainf in the
Right Fmnf Seaf
To use a child restraint here, you will
need a special infantkhild seat attaching
belt and the hardware that goes with it.
See the earlier section about the top
strap if the child restraint has one.
Your dealer can get these and install the
hardware for you. It's free. The special
belt is GM
Part
No. 12340286. Your
dealer can find the correct hardware in
the accessory section of the GM Parts
Catalog.