Replacing A Headlight Bulb - Yamaha MIO AL115S Owner's Manual

Replacing a headlight bulb

If a headlight bulb burns out, replace it
as follows.
1. Do not touch the glass part of the bulb.
NOTICE
_
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the
bulb, and the bulb life will be ad-
versely affected. Thoroughly clean
off any dirt and fingerprints on the
headlight bulb using a cloth moist-
ened with alcohol or thinner.
_
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU37671
1
ZAUU0258
1. Cowling A
1. Remove cowling A. (See page
7-6.)
ECA10660
ZAUU0259
1. Headlight bulb cover
2. Remove the headlight bulb holder
by pushing it inward and turning it
counterclockwise, and then re-
move the burnt out bulb.
7-30
3. Place a new bulb into position,
and then secure it with the bulb
holder.
ZAUU0260
1. Headlight bulb holder
1
4. Install the cowling.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
1
7