Epson WF-C529R Start Here page 2

3
Install ink supply units
(ink packs)
The included initial ink packs are designed for reliable printer setup
Note:
and cannot be used as replacement ink packs or resold. After setup, the
remaining ink is available for printing.
Keep the ink packs out of the reach of children and do not
Caution:
drink the ink.
1
Unlock and open the ink pack tray cover.
2
Press an ink pack tray to release it, then pull the tray out.
3
Remove and discard the protective piece from the ink pack
tray.
4
Shake an ink pack 10 times, then remove it from the
packaging.
Do not touch the green chip on the ink pack.
Note:
5
Move the handle forward, place the ink pack into the ink
pack tray, then move the handle back to its original position.
Make sure the ink pack is fully inserted and level with the
Note:
top of the ink pack tray.
6
Insert the ink pack tray into the printer. Repeat steps 2 to 6
for the other ink packs.
The ink packs are keyed to fit into the correct color slot.
Note:
If you cannot insert the ink pack tray all the way, do not force it.
Make sure the ink pack color matches the color slot on the printer.
7
Close the ink pack tray cover and lock it.
8
Select OK on the LCD screen to start charging the ink.
Ink charging takes approximately 9 minutes. A message
appears when ink charging is complete.
Do not unplug or turn off the product or open the front
Caution:
cover while the product is charging or you'll waste ink.
4
Load paper
See the online User's Guide for information about loading
capacity, available paper types and sizes, loading envelopes,
and using the rear paper feed slot.
1
Make sure the product is done charging the ink, then pull
out the paper cassette.