Troubleshoot Guide; The Brio Is Not Turning On Or Working; The Food Is Fried Unevenly - NuWave Brio 4.5Q Owner's Manual

TROUBLESHOOT GUIDE

The Brio is not turning on or working.

1. The Brio is not plugged in.
2. Did not press ON/OFF.
3. Base Tray with Fry Pan Basket is not in the Brio.
4. Insert the plug into an appropriate grounded power socket.
Press ON/OFF after settings are selected. Place the Base Tray
with Fry Pan Basket into the Brio.
The ingredients fried in the Fry Pan Basket are not
completely cooked.
1. Too many ingredients were used. The cooking temperature is
too low.
2. The cooking time is too short.
3. Remove some ingredients from the Fry Pan Basket; smaller
batches air-fry more evenly. Cook at a higher temperature. Set
the Brio to air-fry for a longer time.

The food is fried unevenly.

1. Certain types of ingredients need to be shaken halfway through
the cooking time.
2. Ingredients that are on the top need to be shaken halfway
through the cooking time.
Fried snacks are not crispy when they come out of the Brio.
1. You used a type of snack meant to be prepared in a traditional
deep fryer.
2. Use snacks designed to be baked in a traditional oven. Lightly
brush some olive oil onto the snacks before placing into Brio
for a crispier result.
Cannot slide the Fry Pan Basket into the appliance properly.
1. The Fry Pan Basket is overfilled. The Fry Pan Basket is not
placed in the Base Tray correctly.
2. Do not fill the Fry Pan Basket more than 4/5 full. Push the Fry
Pan Basket down into the Base Tray until you hear a click.
24 24
troubleshoot guide