Advertisement
TIMING
- As a result of the new EU65 "Energy label" and EU66 " Ecodesign" regulations
issued by the European Commission, which came into force as from January 1st,
2015 , our products have been adapted to comply with these new requirements
- All of the models complying with the energy label requirements, are equipped
with new electronics including a timer device for suction speeds control, when the
air capacity exceeds 650m³/h.Internal motor models, with maximum air capacity
higher than 650m³/h, are equipped with a timer device that automatically switches
the suction speed from 4th to 3rd speed, after 5 minutes operation.
- External motor models are equipped with remote motors that, as for internal
motor versions, include a timer device that switches down the suction speed when
it exceeds 650 m³/h. (See External Motors Instructions ). Remote motors, whose air
capacity exceeds 650m³/h at both 4th and 3rd speed, will have the following by
default timer control functions: The suction speed is automatically switched from
4th to 2nd speed, after 6 minutes operation.
- If the appliance is working at 3rd speed, it is automatically switched to 2nd
speed, after 7 minutes operation. Operation speeds can also be changed during
operation.The energy consumption of the appliance in standby mode is lower than
0.5W.
Please keep this instruction manual for future reference
14
Instruction manual ZAL48CO ZAL48SL ZAL48BK
Advertisement
