Mercury 2002 Villager Owner's Manual page 64

Climate Controls
Turning the EATC system on
HI
OFF A/C
MAX
OFF REAR 1 2 3 4
TEMP
A/C
LO
AUTOMATIC
Press AUTOMATIC, any of the override controls or the fan speed control.
The EATC system will only operate when the vehicle is running.
Turning the EATC system off
Press OFF.
OFF
OFF REAR 1
TEMP
A/C
AUTOMATIC
Automatic operation
Press AUTOMATIC and select the desired temperature. The selected
temperature and the word AUTO will appear in the display window. The
EATC system will either heat or cool to achieve the selected
temperature. The system will automatically determine fan speed, airflow
location and if outside air or recirculated air is required. Fan speed
remains automatic unless the fan speed thumbwheel is turned or the
steering wheel fan speed control (if equipped) is pressed.
When in AUTOMATIC and weather conditions require heat, air will be
sent to the floor. However, if the engine is not warm enough to provide
heat, the fan will be at a low speed and the air will be directed to the
windshield. In approximately 3 ⁄ minutes or less, the fan speed will start
1
2
to increase and the airflow location will change to the floor area.
64