Table of Contents
Advertisement
Controls in detail
Memory function
Storing exterior rear view mirror park-
ing position
For easier parking, you can adjust the pas-
senger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position, see "Setting parking position for
exterior rear view mirror" ( page 165).
i
You can store a parking position for the
passenger-side exterior rear view mir-
ror for each SmartKey or SmartKey
with KEYLESS-GO*.
124
The buttons are located on the driver's
door.
1 Passenger-side exterior rear view mir-
ror button
2 Adjustment button
M Memory button
Stop the vehicle.
Switch on ignition ( page 34).
Press button 1.
The passenger-side exterior rear view
mirror is selected.
Adjust the passenger-side exterior rear
view mirror with button 2 so that you
see the rear wheel and the road curb.
Press memory button M.
Within three seconds, press bottom of
adjustment button 2 on ƒ.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the
above steps. After the setting is stored,
you can move the mirror again.
Advertisement
Table of Contents
