Table of Contents
Advertisement
Child seat anchors – LATCH type
This vehicle is equipped with two LATCH
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the rear seats) for
the installation of a LATCH child seat with
the matching anchor fittings.
If you have not installed a child seat, the
LATCH mounting anchor fittings are cov-
ered with an upholstery blend.
1 Upholstery blend.
Remove upholstery blend 1 and store
it in the rear center armrest.
2 Indicates the position of the anchors
3 Anchors
Install child seat according to the man-
ufacturer's instructions.
Safety and Security
Occupant safety
i
The child seat must be firmly attached
in the right and left side anchor fittings.
Non-LATCH type child seats may also
be used and can be installed using the
vehicle's seat belt system. Install child
seat according to the manufacturer's
instructions.
Warning!
Children too big for child restraint systems
must ride in back seats using regular seat
belts. Position shoulder belt across chest
and shoulder, not face or neck. A booster
seat may be necessary to achieve proper
belt positioning for children from 41 lbs until
they reach a height where a lap/shoulder
belt fits properly without a booster.
Install child seat according to manufactur-
er's instructions.
The child seat must be firmly attached in the
right and left side anchors 3.
G
77
Advertisement
Table of Contents
