Table of Contents
Advertisement
Storing exterior rear view mirror
parking position
For easier parking, you can adjust the pas-
senger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position, see "Activating exterior rear view
mirror parking position" ( page 184).
1 Passenger-side exterior rear view
mirror button
2 Adjustment button
3 Memory button
Stop the vehicle.
Switch on the ignition ( page 38).
Press button 1.
The passenger-side exterior rear view
mirror is selected.
Adjust the exterior rear view mirror
with button 2 so that you see the rear
wheel and the road curb.
Controls in detail
Memory function
Press memory button M 3.
Within 3 seconds, press bottom of ad-
justment button 2.
The parking position is stored if the
mirror does not move.
i
If the mirror does move, repeat the above
steps. After the setting is stored, you can move
the mirror again.
125
Advertisement
Table of Contents
